OSFP Housing 800G: Precision Zinc Die-Cast Module Case
Youge manufactures this OSFP Housing 800G as a precision die-cast module case for 800G optical transceivers. Data centers, AI/ML clusters, and telecom backbone networks use these housings every day. The housing combines a zinc alloy body with aluminum thermal fins. The zinc body delivers dimensional accuracy and EMI containment. Meanwhile, the aluminum fins add supplementary heat dissipation. Youge offers the housing in IHS and RHS configurations. However, these two OSFP architectures do not fit the same cage. Therefore, you should confirm your cage type before ordering.

Why Zinc Die-Casting Works for the OSFP Housing 800G Body
Zinc alloy die-casting (Zamak 3/5 grade) works well for the OSFP Housing 800G body. The process achieves thin-wall geometry and dimensional consistency for the internal cavity. Moreover, the zinc surface provides continuous EMI containment. However, zinc delivers only about 100–113 W/m·K in thermal conductivity. This value is adequate for a structural and shielding layer. But it cannot serve as the sole heat path for higher-power 800G modules.
The aluminum heat fins on this OSFP Housing 800G address that limitation. Aluminum delivers 160–230 W/m·K thermal conductivity. In addition, the finned geometry increases convective surface area in the cage airflow. As a result, the housing retains zinc’s casting precision and adds aluminum’s thermal headroom at the fin level. This hybrid approach balances tooling cost, shielding performance, and heat dissipation. For even higher conductivity, Youge offers copper (≈400 W/m·K) or 6063-grade aluminum alloy (180–200 W/m·K) upgrades. Youge also manufactures [QSFP-DD housings](/product/qsfp-dd-housing/) and [SFP28 housings](/product/sfp28-housing/) with the same die-casting process.
The [OSFP-MSA](https://www.snia.org/) defines two distinct housing architectures. These two architectures do not fit the same cage
| Feature | OSFP-IHS | OSFP-RHS |
|---|---|---|
| Top profile | Finned heat sink | Smooth flat top |
| Module height | ~13 mm | ~9.5 mm |
| Heat path | Module fins → airflow | Cage heat sink / cold plate |
| Typical cooling | Air-cooled | Liquid / cold plate |
| Cage | Standard OSFP | RHS-specific |
Youge offers this housing in both finned (IHS-style) and flat-top (RHS-style) variants. The IHS configuration suits air-cooled switches. In these switches, the module’s own fins drive convective cooling. On the other hand, the RHS configuration suits host cages with a heat sink or cold plate. That plate must contact a flat housing surface directly. If you specify the wrong architecture, the housing will not seat in the target cage.
Reliability Testing for Every Transceiver Housing
Youge tests each Optical Transceiver housing against these criteria before shipment:
-
MSA, RoHS, REACH — form-factor and substance compliance
-
48-hour salt spray — plating and corrosion resistance
-
90°C / 24-hour aging — thermal stress screening
-
ISO 9001 / ISO 14001 — quality and environmental management
Youge offers three operating temperature grades. The standard grade covers 0°C to +90°C case temperature. The extended grade covers –40°C to +85°C. Finally, the industrial grade covers –85°C to +85°C.
Custom Module Housing Manufacturing and Ordering
Youge supplies this housing as a finished assembly. The assembly includes the top housing, bottom housing, aluminum heat fins, SUS304 shield, and a stainless-stamped / TPV pull tab. All parts come from one manufacturing chain. That chain covers mold making, die-casting, machining, injection molding, and stamping. Therefore, Youge coordinates geometry, fin bonding, shield fit, and pull-tab color against one drawing set. See our [manufacturing capabilities](/about/manufacturing/) for details.
Youge ships in 5–15 days. Weekly capacity reaches 2,000 pieces. MOQ depends on your project. Youge accepts drawings in PDF and CAD. Inquiry us or send your drawing today.